Search
Browse by Manufacturer

Grow Wurk's Extended Protection Plan

Grow Wurk's Extended Protection Plan extends the manufacturer's warranty for an extended time period. The first year your product is covered by the manufacturer's warranty and then once that expires the Grow Wurk's Extended Protection Plan kicks in!

Terms and Conditions
This is an example of a HTML caption with a link.

Hydro-Logic Pressure Booster Pump for Stealth RO 100 and 200


Product Documents

Customer Rating
ratingratingratingratingrating
Rate this item
Suggested Retail:
Sale Price:
Availability:
$230.95
$181.49


Discreet Shipping Email Page
Brand: Hydro-Logic
Item #: 728897
UPC: 812111010225
This pump is designed to be installed before the Stealth-RO to boost the inlet pressure. There needs to be at least 40 psi and up to 80 psi of inlet pressure for the Stealth-RO to function properly. People on wells and other situations of low pressure can benefit greatly from this pump. Use this pump for low water pressure (below 40 psi) situations or those wanting higher flow rates. It boosts the pressure significantly, allowing the Stealth-RO to run with higher flow and efficiency while having better TDS removal. The pump is designed for long service life and runs very quietly.

Instructions:

  1. Start by cutting the white 3/8" inlet line on your Stealth-RO unit. Push the two ends of the cut tubing into the quick connect fittings on the pump. Make sure the arrow on the end of the pump is pointing in the direction of the water flow. The arrow should be pointed towards the RO unit.
  2. Next, cut the blue 1/4" purified water line near the unit and install the pressure switch by pushing in the two ends of the tube into the quick connect fittings. The pressure switch should be installed before the included shut off ball valve or the optional float valve. There is no arrow indicating direction of the pressure switch. It can be installed either way.
  3. Then connect the transformer to one of the pressure switch's connections and the pump to the other connection. Plug in the transformer to a standard 115v wall receptacle and you are ready to go. When either the included shut off ball valve is turned off or the optional float valve is activated, the pressure on the blue RO line will increase and trigger the pressure switch to shut the pump off.

Note: The Stealth RO operates at 40-80 PSI. There is an adjustable allen screw on the front of the pump to dial in the pressure if needed. Ideal PSI is 70. You'll need a 1.5 millimeter allen wrench.




*Product image may vary from actual product.

Customers Who Bought This Item Also Bought

Hydro-Logic Stealth Float Valve
Suggested Retail: $20.90
Sale Price: $19.35
ratingratingratingratingrating
Designed for use with Hydro-Logic Stealth RO 100 GPD and 200 GPD. This valve comes with a 1/4" quick connect fitting. Use this float valve to adjust water level and can be mounted horizontally or vertically. The kit allows you to fill a reservoir or tank,... Read More
Hydro-Logic Stealth RO 150
Suggested Retail: $247.50
Sale Price: $181.49
ratingratingratingratingrating
Produces up to 150 GPD (gallons per day) of ultra-pure, low PPM water. Removes 98%+ of chlorine and contaminants. Wastes approximately 25% less water than other RO Systems. Everything included in the box for quick hook-up. Customized for gardening and hyd... Read More
Hydro-Logic Stealth RO 200
Suggested Retail: $346.50
Sale Price: $243.07
Produces up to 200 GPD (gallons per day) ultra-pure, low PPM water. Removes 98%+ of chlorine and contaminants. Wastes approximately 25% less water than other RO Systems. Everything included in the box for quick hook-up. Customized for gardening and hydrop... Read More

Product Reviews

Rate This Product:
or Create a Review
(2 Ratings, 0 Reviews) Average Rating:
ratingratingratingratingrating